CLOUD MANUFACTURING ROBOT SPOT WELDING 5 D03, PLC MITSUBISHI DAN SERVER MENGGUNAKAN PROTOKOL ETHERNET NODE-RED
DOI:
https://doi.org/10.59407/jpki2.v3i3.2519Keywords:
PLC, Node-RED, Cloud Manufacturing, Protokol Ethernet, Industri 4.0, Integrasi DataAbstract
Industri 4.0 telah mengubah paradigma operasional pabrik melalui digitalisasi, automasi, dan integrasi sistem berbasis cloud. Penelitian ini mengkaji implementasi Node-REDsebagai gateway komunikasi antara PLC Mitsubishi Q Seriesyang digunakan pada robot spot welding 5 D03 dan server berbasis cloud, menggunakan protokol Ethernet UDP. Tujuan penelitian adalah untuk mengatasi permasalahan integrasi antar perangkat yang memiliki protokol komunikasi berbeda, meminimalisir biaya, dan meningkatkan akurasi monitoring produksi secara real-time. Metode yang digunakan meliputi analisis sistem, konfigurasi parameter komunikasi, pengembangan program Node-RED berbasis flowchart, serta uji coba di lapangan pada departemen welding dan stamping. Hasil penelitian menunjukkan bahwa penggunaan Node-RED memberikan kompatibilitas tinggi, efisiensi biaya, dan performa konektivitas yang konsisten yang mendukung operasional sistem manufaktur berbasis cloud.
References
Bolton, W. (2015). Programmable logic controllers: An introduction. Industrial Automation Journal, 12(4), 112–120.
Dai, J., and Xu, T. (2022). Evaluating data transmission in industrial automation using UDP and TCP/IP protocols. Journal of Control & Systems Engineering, 23(8), 412–425.
Ferencz, G., and Domokos, C. (2020). Node-RED for industrial IoT applications: A case study on cloud-based data processing. Automation & Control Engineering Journal, 35(5), 567–582.
Gao, L., and Peng, Y. (2023). Modular smart factory control using Node-RED and MQT. Smart Manufacturing Systems, 8(4), 233–245.
Gharibvand, S., Liang, X., and Zhu, J. (2024). Cloud-based manufacturing systems: Challenges and opportunities. International Journal of Advanced Manufacturing Technology, 102(3), 455–470.
Hagino, S. (2021). Leveraging Node-RED for integrated industrial systems. International Journal of Automation and Computing, 18(3), 199–210.
Han, Z., and Li, F. (2021). Adaptive Ethernet-based communication protocols in real-time PLC networks. Journal of Control and Industrial Systems, 17(1), 101–112.
Kumar, A. (2018). Cloud manufacturing: A new paradigm for industrial production. Journal of Manufacturing Systems, 47, 25–35.
Liu, M., Zhang, H., and Wang, Q. (2022). Open-source platforms for IIoT: A comparative analysis of Node-RED and alternatives. Industrial Automation Review, 19(2), 78–88.
Luo, X., and Lin, Z. (2019). Enhancing real-time monitoring in production systems using Ethernet-based protocols. Enhancing Real-Time Monitoring in Production Systems Using Ethernet-Based Protocols, 27(6), 789–805.
Park, J., and Kim, H. (2023). Low-latency cloud manufacturing using UDP-based industrial communication. Smart Manufacturing Journal, 15(2), 98–110.
Shen, W., and Zhang, L. (2023). Cyber-physical systems in smart manufacturing: Integrating PLCs with cloud solutions. Robotics & Automation Review, 21(5), 231–245.
Tanaka, R., and Sato, K. (2021). Cloud-based PLC systems: Implementation and performance analysis. International Journal of Smart Production, 10(4), 344–362.
Verma, P., and Raghavan, S. (2024). Just-in-time production optimization using cloud analytics. Industrial Engineering Review, 14(9), 678–692.
Wang, K., Liu, Y., and Chen, H. (2022). A comparative study of MQTT and Modbus TCP for industrial data communication. IEEE Transactions on Industrial Electronics, 29(11), 2112–2128.
Zhang, Y., Huang, X., and Wang, J. (2023). Optimizing industrial automation through PLC and cloud integration. IEEE Transactions on Industrial Informatics, 19(7), 1234–1247.
