INTEGRASI SMART DAN SAW DALAM PEMILIHAN SUPPLIER UNTUK PENGADAAN BARANG
DOI:
https://doi.org/10.70248/jrsit.v4i1.4624Keywords:
Sistem Pendukung Keputusan, SMART, SAW, Pemilihan SupplierAbstract
Pemilihan supplier memerlukan penilaian yang mampu menempatkan kepentingan setiap kriteria secara proporsional dan membandingkan kinerja supplier dengan arah atribut yang berbeda. Penelitian ini memadukan Simple Multi-Attribute Rating Technique (SMART) untuk membentuk bobot delapan kriteria dan Simple Additive Weighting (SAW) untuk menormalisasi serta memeringkat 100 alternatif supplier. Pemeriksaan dilakukan dengan menghitung ulang nilai preferensi, memisahkan sumbangan atribut biaya dan manfaat, serta mengubah setiap bobot sebesar 20% secara bergantian dalam 16 skenario. Hasil perhitungan menunjukkan bahwa bobot SMART dapat digunakan langsung dalam agregasi SAW. Peringkat pertama tidak berubah pada 12 skenario, sedangkan korelasi urutan supplier pada seluruh skenario tetap lebih dari 0,99. Hasil tersebut menunjukkan bahwa susunan peringkat relatif stabil, meskipun dua supplier teratas masih dapat bertukar posisi ketika prioritas tertentu berubah. Dengan hasil ini, perubahan urutan supplier dapat dipahami dari perubahan bobot dan nilai pada masing-masing kriteria..
References
Amalia, M. N., & Ary, M. (2022). Sistem pendukung keputusan pemilihan supplier dengan menggunakan SMART pada CV. Hamuas Mandiri. Jurnal Sains dan Informatika, 7(2), 127-134. https://doi.org/10.34128/jsi.v7i2.322
Azfar, N. A., & Anggita, S. D. (2024). PENERAPAN METODE WATERFALL PADA SISTEM INFORMASI E-RAPOR. Information System Journal, 7(01), 45-55. https://doi.org/10.24076/infosjournal.2024v7i01.1582
Bakhtiar, A., Rahmadani, D., Lathuihamalo, D., & Maulana, B. (2021). ANALISIS PEMILIHAN SUPPLIER MENGGUNAKAN METODE ANALYTICAL NETWORK PROCESS (ANP) PADA PENGADAAN KOMPONEN RAIL PAD 158-7 (STUDI KASUS : PT PINDAD (PERSERO)). J@ti Undip : Jurnal Teknik Industri, 16(1), 1-9. https://doi.org/10.14710/jati.16.1.1-9
Bas, S. A. (2024). A Hybrid Approach Based on Consensus Decision Making for Green Supplier Selection in Automotive Industry. Sustainability, 16(7), 3096. https://doi.org/10.3390/su16073096
Cakmak, E. (2023). Supplier Selection for a Power Generator Sustainable Supplier Park: Interval-Valued Neutrosophic SWARA and EDAS Application. Sustainability, 15(18), 13973. https://doi.org/10.3390/su151813973
Caristi, G., Boffardi, R., Ciliberto, C., Arbolino, R., & Ioppolo, G. (2022). Multicriteria Approach for Supplier Selection: Evidence from a Case Study in the Fashion Industry. Sustainability, 14(13), 8038. https://doi.org/10.3390/su14138038
Cebesoy, M., Tuncer Şakar, C., & Yet, B. (2024). Multicriteria decision support under uncertainty: combining outranking methods with Bayesian networks. Annals of Operations Research, 355(3), 2971-2998. https://doi.org/10.1007/s10479-024-06064-8
Diana, A., & Dwi Achadiani (2022). Penerapan metode Analytical Hierarchy Process dan Simple Additive Weighting untuk Pemilihan Supplier pada Bengkel. Jurnal Teknik Informatika dan Sistem Informasi, 8(1). https://doi.org/10.28932/jutisi.v8i1.4077
Fachrizal, M., Diana, A., & Utari, D. R. (2022). Sistem Pendukung Keputusan Untuk Pemilihan Supplier Terbaik Dengan Metode Analytical Hierarchy Process Dan Simple Additive Weighting. ikraith-informatika, 6(3). https://doi.org/10.37817/ikraith-informatika.v6i3.2224
Farida, Y., Krismadewi, P., Yuliati, D., & Khaulasari, H. (2022). Selecting The Best Broiler Chicken Supplier of PT Sentral Unggas Perkasa Using Analytical Hierarchy Process and Weighted Product Methods. Jurnal Ilmiah Teknik Industri, 21(2), 281-290. https://doi.org/10.23917/jiti.v21i2.18045
Hamdan, S., Cheaitou, A., Shikhli, A., & Alsyouf, I. (2023). Comprehensive quantity discount model for dynamic green supplier selection and order allocation. Computers & Operations Research, 160, 106372. https://doi.org/10.1016/j.cor.2023.106372
Hardono, V., Dewa, P. K., & Kurnia, H. (2023). ANALISIS PEMILIHAN PEMASOK TANAH LIAT DALAM PERBAIKAN KUALITAS PADA UMKM KERAJINAN GERABAH. J@ti Undip: Jurnal Teknik Industri, 18(3), 190-201. https://doi.org/10.14710/jati.18.3.190-201
Hasiani, F. M. U., Haryanti, T., Rinawati, R., & Kurniawati, L. (2021). Sistem Pendukung Keputusan Pemilihan Supplier Produk Ritel dengan Metode Analytical Hierarchy Process. SISTEMASI, 10(1), 139. https://doi.org/10.32520/stmsi.v10i1.1125
Imansuri, F., Aritama, D., Sumasto, F., & Purwojatmiko, H. (2023). Selection of Pin Component Sub Suppliers for Checking Fixture Products Using an Analytical Hierarchy Process Approach. Teknoin, 28(2), 21-28. https://doi.org/10.20885/teknoin.vol28.iss2.art3
Immanuel, J., Andrian, D., & Wulandari, L. M. C. (2022). Penerapan analisis multi kriteria dengan metode SMART dalam pemilihan pemasok pada UD. Bahtera. JENIUS: Jurnal Terapan Teknik Industri, 3(2), 159-168. https://doi.org/10.37373/jenius.v3i2.275
Kayani, S. A., Warsi, S. S., & Liaqait, R. A. (2023). A Smart Decision Support Framework for Sustainable and Resilient Supplier Selection and Order Allocation in the Pharmaceutical Industry. Sustainability, 15(7), 5962. https://doi.org/10.3390/su15075962
Lopes, A. P., & Rodriguez-Lopez, N. (2021). A Decision Support Tool for Supplier Evaluation and Selection. Sustainability, 13(22), 12387. https://doi.org/10.3390/su132212387
Manik, M. H. (2023). Addressing the supplier selection problem by using the analytical hierarchy process. Heliyon, 9(7), e17997. https://doi.org/10.1016/j.heliyon.2023.e17997
Muttaqin, Z., Handayani, D., & Triyono, G. (2024). Penerapan Metode Simple Additive Weighting (SAW) Dalam Pemilihan Supplier Terbaik Pada Industri Manufaktur. Teknika, 13(3), 418-427. https://doi.org/10.34148/teknika.v13i3.1024
Rahardjo, B., Wang, F. K., Lo, S. C., & Chou, J. H. (2023). A Hybrid Multi-Criteria Decision-Making Model Combining DANP with VIKOR for Sustainable Supplier Selection in Electronics Industry. Sustainability, 15(5), 4588. https://doi.org/10.3390/su15054588
Raveena, R., & Umamaheswari, S. (2025). Integrated MCDM framework for sustainable pharmacy supplier selection using pioneering criteria with fuzzy TOPSIS SVR and GRA. Scientific Reports, 15(1), 19144. https://doi.org/10.1038/s41598-025-02975-z
Rizky Aditama, B., & Akbar, M. (2024). Sistem Penunjang Keputusan Pemilihan Pemasok Gula Merah Menggunakan Simple Additive Weighting dan Weighted Product 1*. Remik: Riset dan E-Jurnal Manajemen Informatika Komputer, 8(3). https://doi.org/10.33395/remik.v8i3.13851
Rusvinasari, D. (2024). Sistem pendukung keputusan pemilihan supplier terbaik dengan metode Simple Additive Weighting (SAW) berbasis website. Journal of Data Science Theory and Application, 3(2), 28-39. https://doi.org/10.32639/f3y4j154
Saputro, T. E., Figueira, G., & Almada-Lobo, B. (2023). Hybrid MCDM and simulation-optimization for strategic supplier selection. Expert Systems with Applications, 219, 119624. https://doi.org/10.1016/j.eswa.2023.119624
Tavana, M., Sorooshian, S., & Mina, H. (2023). An integrated group fuzzy inference and best–worst method for supplier selection in intelligent circular supply chains. Annals of Operations Research, 342(1), 803-844. https://doi.org/10.1007/s10479-023-05680-0
Tirkolaee, E. B., Dashtian, Z., Weber, G. W., Tomaskova, H., Soltani, M., & Mousavi, N. S. (2021). An Integrated Decision-Making Approach for Green Supplier Selection in an Agri-Food Supply Chain: Threshold of Robustness Worthiness. Mathematics, 9(11), 1304. https://doi.org/10.3390/math9111304
Utama, D. M., Maharani, B., & Amallynda, I. (2021). Integration Dematel and ANP for The Supplier Selection in The Textile Industry: A Case Study. Jurnal Ilmiah Teknik Industri, 20(1), 119-130. https://doi.org/10.23917/jiti.v20i1.13806
Więckowski, J., Wątróbski, J. A., & Sałabun, W. (2024). Toward robust decision-making under multiple evaluation scenarios with a novel fuzzy ranking approach: green supplier selection study case. Artificial Intelligence Review, 58(1), 3. https://doi.org/10.1007/s10462-024-11006-8
Zahara, A., Samsudin, & Fakhriza, M. (2022). Perbandingan metode SMART, SAW, MOORA pada pembangunan sistem pendukung keputusan pemilihan calon mitra statistik. Journal of Computers and Digital Business, 1(2), 72-82. https://doi.org/10.56427/jcbd.v1i2.17
Zakeri, S., Yang, Y., & Konstantas, D. (2022). A Supplier Selection Model Using Alternative Ranking Process by Alternatives’ Stability Scores and the Grey Equilibrium Product. Processes, 10(5), 917. https://doi.org/10.3390/pr10050917
