INSTALASI MESIN SAMPAH PLASTIK UNTUK TEKNOLOGI PENGUMPULAN DAN PEMILAHAN SAMPAH ANORGANIK BERKELANJUTAN
DOI:
https://doi.org/10.59407/jrsit.v1i4.566Keywords:
Sampah Organik, Sampah Anorganik, Instalasi Mesin, Prototipe alat pemilah sampah, Sensor LEDAbstract
The potential for waste and biomass definitely exists in every region, because every day humans naturally produce waste to meet their needs. However, the potential for waste and biomass in each area is different in proportion to the population. As the population increases in each region, the potential for waste and biomass produced also continues to increase. This research aims to: (1) Create a design for sorting organic and inorganic waste, and (2) Find out how the organic and inorganic waste sorting equipment works. The waste used includes cardboard, leaves, paper, wood twigs and banana peels for organic waste, as well as plastic, bottles, iron, cans and plastic bottles for inorganic waste. After designing and testing the sorting tool, the conclusion was that the design of the tool with the three tool sensors used was successful in differentiating the types of organic and inorganic waste so that the organic waste valve or inorganic waste valve would open according to which type of waste detected it fell into which category, then Monitoring the contents of the trash can will appear on the LCD and the recommended distance for organic waste with a sensor is less than 27 mm and for inorganic waste with a sensor is less than 3 mm.
References
Akbar, M., Anjasmara, S. D., & Wardhani, K. D. K. (2021). Rancang Bangun Alat Pendeteksi Sampah Organik dan Anorganik Menggunakan Sensor Proximity dan NodeMCU ESP8266. Jurnal Komputer Terapan, 7(2), 290–299. https://doi.org/10.35143/jkt.v7i2.5178
Almanda, D., Isyanto, H., & Samsinar, R. (2018). Perancangan Prototype Pemilah Sampah Organik Dan Anorganik Menggunakan Solar Panel 100 Wp Sebagai Sumber Energi Listrik Terbarukan. Seminar Nasional Sains Dan Teknologi, 1–9. https:http://jurnal.umj.ac.id/index.php/semnastek
Ardimansyah, M. I., Hendriyana, H., & Muhammad, R. (2022). Rancang Bangun Prototipe Klasifikasi Sampah Otomatis Dengan Sensor Proximity Dan Linear Rail Slider Box Berbasis Mikrokontroler Arduino Di Lingkungan UPI Kampus Cibiru. Journal of Software Engineering, Information and Communication Technology (SEICT), 1(1), 33–38. https://doi.org/10.17509/seict.v1i1.29798
Badlisyah, T., Agustinur, S., & Rosa, M. (2022). Study Pengolahan Sampah Organik Dan Anorganik Pada Unit Bank Sampah Badan Usaha Milik Gampong (Bumg) Blang Krueng. Lantanida Journal, 9(2), 149. https://doi.org/10.22373/lj.v9i2.12501
Bahtiar, Y. A., Ariyanto, D., Taufik, M., & Handayani, T. (2019). Pemilah Organik dengan Sensor Inframerah Terintegerasi Sensor Induktif dan Kapasitif. Jurnal EECCIS, 13(3), 109–113.
Clasissa Aulia, D., Kiswanto Situmorang, H., Fauzy Habiby Prasetya, A., Fadilla, A., Safira Nisa, A., Khoirunnisa, A., Farhan, D., Nur, D., Nindya, A., Purwantari, H., Octaviani Dwi Jasmin, I., Aulia Akbar, J., Mesrina Cicionta Ginting, N. B., Fadhilah Lubis, R., Pangestiara Program Studi Ilmu Kesehatan Maskarakat, Z. G., & Kesehatan Masyarakat, F. (2021). Peningkatan Pengetahuan dan Kesadaran Masyarakat tentang Pengelolaan Sampah dengan Pesan Jepapah. Jurnal Pengabdian Kesehatan Masyarakat (Pengmaskesmas), 1(1), 62–70.
Harjanti, I. M., & Anggraini, P. (2020). Pengelolaan Sampah Di Tempat Pembuangan Akhir (TPA) Jatibarang, Kota Semarang. Jurnal Planologi, 17(2), 185. https://doi.org/10.30659/jpsa.v17i2.9943
Kurniati, K. (2021). Penerapan Metode Prototype Pada Perancangan Sistem Pengarsipan Dokumen Kantor Kecamatan Lais. Journal of Software Engineering Ampera, 2(1), 16–27. https://doi.org/10.51519/journalsea.v2i1.89
Rosiana, E., & Perdana, R. (2022). Rancang Bangun Sistem Robot Pemilah Sampah Anorganik dengan Inductive Proximity dan LDR Sebagai Sensor. Building of Informatics, Technology and Science (BITS), 4(2). https://doi.org/10.47065/bits.v4i2.2017
Zuraidah, Z., Rosyidah, L. N., & Zulfi, R. F. (2022). Edukasi Pengelolaan Dan Pemanfaatan Sampah Anorganik Di Mi Al Munir Desa Gadungan Kecamatan Puncu Kabupaten Kediri. Budimas : Jurnal Pengabdian Masyarakat, 4(2), 1–6. https://doi.org/10.29040/budimas.v4i2.6547
